PT inox | PS inox | PST inox Series

  • Features

    The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous fluids.

    Construction and technical characteristics

    The capacity varies depending on the rotor step. The PS stainless steel series covers a capacity range from 50 to 4000 l/min, the PT stainless steel series from 50 to 1000 l/min with maximum rotation speed of 140 rpm or 200 rpm. The pressure varies with the length of the stator from 0 to 30 bar. The parts in contact with the liquid are constructed in various materials, depending on the fluid to be pumped. The rotating parts are normally in casehardening or chromium-plated steel or in stainless steel 304 or 316. The stators are constructed in natural or synthetic rubber in various mixes (Viton, Silicon, Perbunan, etc.). Specific materials can be used on request.

    Field of use

    The applications for this type of pump are virtually infinite due to its special construction, the materials used, the technical measures adopted and the singular working mechanism that guarantee maximum performance whether pumping must, bunches of grapes, fruit juices, meat extracts, jam, marmalade, acids, glues, oils, liquid soaps, detergents, etc.
    When pumping fluids with density and/or abrasion characteristics different from those of water, it is recommended never to reach the pressure limit and capacity values expressed in the table.
    For correct function of the pump, it is recommended to check that air is not being suctioned and that the supply of fluid to be pumped is constant to avoid the pump turning dry.
    The values featured in the table refer to tests performed with fluids with characteristics similar to those of water.

  • Gallery

    PT Tramoggia
    PT Rompiponte
    PT Rompiponte Sez
    Elettropompa PS
    Elettropompa PS Travaso
    Elettropompa PST
    Elettropompa PS Travaso+variat
    Elettropompa PST Con Tramoggia
    Elettropompa PST Con Tramoggia E 2 Coclee
    Part Elettropompa PST Con Tramoggia 2 Coclee
    Elettropompa PST Con Tramoggia E Coclea
    Part Elettropompa PST Con Tramoggia E Coclea
  • Technical data

    PS inox SERIES
    TYPECAPACITY l/min.HEAD barPOWER HP
    PS 40 50/7 50 7 3
    PS 40140/7 140 7 3
    PS 40 140/20 140 20 4
    PS 45 120/7 120 7 4
    PS 47/190/7 190 7 4
    PS 50 120/10 120 10 4
    PS 50 120/30 120 30 7,5
    PS 55 200/10 200 10 5,5
    PS 55 200/26 200 26 7,5
    PS 57 450/7 450 7 5,5
    PS 60 370/10 370 10 7,5
    PS 60 370/14 370 14 7,5
    PS 60 370/26 370 26 10
    PS 67 680/7 680 7 12,5
    PS 80 520/14 520 14 10
    PS 80 520/30 520 30 15
    PS 87 960/7 960 7 15
    PS 120 870/12 870 12 15
    PS 120 870/26 870 25 25
    PS 127 1300/7 1300 7 15
    PS 200 1230/14 1230 14 20
    PS 200 1230/26 1230 26 30
    PS 207 2100/7 2700 7 20
    PS 300 1400/14 1400 14 30
    PS 307 4000/7 4000 7 60
    PS 350 2000/14 2000 14 30
    PS 400 2800/10 2800 10 30
    PS 500 3500/10 3500 10 60

     

    PS inox SERIES - Twin screw geometry
    TYPECAPACITY l/min.HEAD barPOWER HP
    PS 33 160/7 130 7 4
    PS 43 300/10 260 10 5,5
    PS 53 410/10 330 10 5,5
    PS 63 750/10 470 10 10
    PS 83 800/14 600 14 12,5
    PS 123 830/12 750 12 15
    PS 303 1600/14 1500 14 30
    The technical characteristics of the PS and PST series are the same.

     

    PT inox SERIES
    TYPECAPACITY l/min.TURNS rpm/min.HEAD barPOWER HP
    PT 40 140/75020054
    PT 55 200/78420074
    PT 60 370/78314075,5
    PT80 520/711514075,5
    PT 120 870/723014075,5
    PT 200 1230/743014077,5
    PT 300 1400/7500140712,5
    PT 350 2000/7670140715
    PT 40 140/76028054
    PT 55 200/712028074
    PT 60 370/711620075,5
    PT80 520/716020075,5
    PT 120 870/7233020075,5
    PT 200 1230/757020077,5
    PT 300 1400/7710200712,5
    PT 350 2000/71000200715

     

    PT inox SERIES - Twin screw geometry
    TYPECAPACITY l/min.TURNS rpm/min.HEAD barPOWER HP
    PT 33 160/75014084
    PT 43 300/108014075,5
    PT 53 410/1011014075,5
    PT 63 750/1018314075,5
    PT 83 800/1429014077,5
    PT 123 830/1234014077,5
    PT 33 160/76019084
    PT 43 300/1011619075,5
    PT 53 410/1016519075,5
    PT 63 750/1023019075,5
    PT 83 800/1439019077,5
    PT 123 830/1249019077,5
    The technical characteristics of the PS and PST series are the same.

    PT inox SERIES
    TYPEABCDEFGHIL
    PT 40 140/749044041013405204453805204401050
    PT 55 200/755044041014005204453805204401050
    PT 60 370/773075041018908304453808307501050
    PT 80 520/784075041020008304453808307501050
    PT 120 870/789075049520928304453808307501050
    PT 200 1230/795075049521308305703808307501050
    PT 300 1400/798075054022708305703808307501050
    PT 350 2000/798075052022508307154008307501050

     

    PT inox SERIES - Twin screw geometry
    TYPEABCDEFGHIL
    PT 33 160/553044041013805204453805204401050
    PT 43 300/760550043015357304453807306501000
    PT 53 410/761050043015407304453807306501000
    PT 63 750/777075041019308304453808307501050
    PT 83 800/784075054021808304453808307501050
    PT 123 870/789075054021808304453808307501050
    The above measurements are indicative only and can be varied at the manufacturer's discretion.
  • Flow Rate Curves

    Standard geometry


     HIGHLY ABRASIVE LIQUID SLIGHTLY ABRASIVE LIQUID

    Twin screw geometry


     HIGHLY ABRASIVE LIQUID SLIGHTLY ABRASIVE LIQUID

    Long pitch geometry


     HIGHLY ABRASIVE LIQUID SLIGHTLY ABRASIVE LIQUID